noProduktnummer: STR130
Strobies iSYNC 4 trådløs blitzutløser Sender og mottager (*)
The I Sync 4 has 4 independent radio channels for use where multiple photographers may be using wireless triggers such as at a wedding etc. Now you can set the channel and still keep on shooting without interference from other photographers.
A major benefit of the receivers is the ability to switch between optical triggering or wireless triggering.
- Optical triggering is similar to your in built sync cell on your studio flash heads and can allow a greater distance to be used when using Infrared triggers such as the Interfit INT411 or receiving white light from a second head. Ideal for extending the range where the flash may not be received by your in built sync cells.
- Wireless triggering when used with the radio trigger in this kit on your camera allows out of sight flash triggering or around walls and most obstacles up to a maximum distance of 30 mtrs (100 feet).
Each receiver has a built in light stand tread on the bottom to allow your speedlite to be stand mounted. In addition a PC sync cable and socket is included along with a mono jack converter to fit both large and small jack sync sockets for connecting to studio lighting. Runs on long life lithium batteries (included).
PLEASE NOTE :
- The iSync4 is not designed for iTTL or eTTL operation, it is a MANUAL ONLY SYSTEM, therefore the camera and flash must be put in to MANUAL MODE and flash calculations made manually.
- Set the Camera to MANUAL MODE, select the shutter speed of 1/125th and only adjust the aperture to give the desired results according to the subjects distance and coverage of light required.
- Set the Flashguns to MANUAL MODE
The Strobies iSync 4 Wireless and Optical Trigger and Receiver Kit includes:
- 1 – Receiver
- 1 – Transmitter
- 1 – Sync Cable
- 1 – Mono Jack Converter (Large and Small)
- 1 – 23A Battery for Transmitter
- 1 – Cr2 Battery for Receiver
- Link til produsentens hjemmeside
| Bilde | Produkt | Pris | Kjøp |
|---|---|---|---|
BS14
|
Overgang fra Blitssko til 1/4" gjengeGjør at utstyr med 1/4" gjenge kan settes i blitssko.
Stock:
Ikke på lager
Utsolgt
|
|
|
INT492C
|
Strobies Kabel - PC - Minijack (*)Kabel for overgang mellom radiomottager og studioblits. Kan også brukes mellom radiosender og PC-inngang på kamera.
Stock:
Ikke på lager
Utsolgt
|
|
|
4690000165
|
Batteri Energizer Lithium CR2 (3V) (*)
Stock:
På lager
8 på lager
|
|
|
STR129
|
Strobies iSYNC 4 trådløs blitzmottaker (Kun mottaker) (*)Mottager av radio- (STR129) og IR (lys) signal. Kan løse ut både kamerablitser (har blitssko) og studioblitser (liten og stor jack). Med IR/blitsblink-setting kan den brukes alene. Har mye bedre følsomhet enn IR sensoren i studioblitsen
Stock:
Ikke på lager
Utsolgt
|
|
- Utskriftsversjon
- Del / Send / Bokmerk